The 2012 T@G
I think the larger ICECO GO20 would also fit, and that version has the ability to have a freezer section and a refrigerator section. The GO12 only has one compartment -you can either use it as a freezer or a refrigerator – but not both at the same time. Adding a 12V Refrigerator to my Teardrop Kitchen was one of the best mods I have made to my
Click here for more Teardrop Camper Kitchen Storage Ideas
Adding a 12V Refrigerator to my teardrop kitchen
**This page contains affiliate links where if you purchase, and as an Amazon Associate I earn from qualifying purchases.
I purchased heavy duty 20″locking sliders from Amazon and my brother in law had a scrap piece of wood in his workshop and voila! When adding these sliders, first make sure the trailer is level, and then the sliders must also be level.
I chose not to drill though the counter to run the cord to the 12 v plug, I suppose I may do that in the future. The ICECO GO12 also can be plugged into the 110V ac plug when the camper is plugged into shore power. My camper has built in solar panels and this combo works great even when running on solar and the battery.
Let me know in the comments your favorite 12v refrigerator for a teardrop trailer.
Tony Ojeda says
Excellent! What are the dimensions of the board? How far back from the front edge of the board are the slides installed? Thanks!!!
campmymy1 says
Hi! The board is 15 1/16 wide by 23 1/4 long. The slides are only about 1/4″ – 1/2″ back from the front edge. This does not included the lock, which does hang over the edge a bit.
Tony Ojeda says
Thanks so much for the info!!
Is the 1/4″ to 1/2″ back from the cabinet or the board? The distance from the front of the board seems more than 1/2″. On the other hand, the distance back from the face of the cabinet appears to be 1/2″ .
Thanks again!!!!